CENTRIFUGAL PUMPS

For today’s machinery and tomorrow’s demands, ACE centrifugal pumps lead the industry! Pump capabilities range up to 190 gpm and 190 psi!

With the largest selection of models, Hypro allows you to match the right pump to your equipment and task. Use Hypro centrifugal pumps for chemical spraying and transfer applications.

The broad, versatile line includes models with rugged housings of cast iron and polypropylene that stand up to strong chemical herbicides.

Polypropylene pumps are lightweight and provide maximum resistance to corrosive chemicals such as acid fertilizers.

Fimco
Code

Model
Number

Description

Weight

Price

5271573

PTOC-600-6SP

Cast iron 1-1/4” x 1” straight centrifugal with pulleys and 10 groove belt arranged for direct mounting on 1-3/8 600RPM PTO shaft, 0-70 PSI. Equipped with 6 spline PTO drive shaft. Viton mechanical seal. Fully guarded for operator safety.

45

$765.00

5271574

PTOC-600-QC

Cast iron 1 1/4” x 1” straight centrifugal with pulleys and 10 groove belt arranged for direct mounting on 1-3/8” 600RPM PTO shaft 0-70 PSI. Equipped with 6 spline quick coupler PTO drive shaft. Viton mechanical seal. Fully guarded for operator safety.

46

$775.00

5271940

PTOC-600-B

Cast iron 1 1/4” x 1” straight centrifugal with pulleys and 10 groove belt. 1” Diameter stub shaft and integral mounting base 600 RPM Tumblerod drive shaft. 0-70 PSI. Equipped with Viton mechanical seal. Fully guarded for operator safety.

42

$775.00

5271543

PTOC-1000-21SP

Cast iron 1 1/4” x 1” straight centrifugal with pulleys and 10 groove belt arranged for direct mounting on 1 3/8”1000 RPM PTO shaft. 0-70 PSI. Equipped with 21 spline split PTO drive shaft and split ring locking collar. Viton mechanical seals. Fully guarded for operator safety.

43

$790.00

5271822

PTOC-1000-20SP

Cast iron 1 1/4” x 1” straight centrifugal with pulleys and 10 groove belt arranged for mounting on 1 3/4” 1000 RPM PTO shaft. 0-70 PSI. Equipped with split PTO drive shaft and split ring locking collar, Viton mechanical seals. Fully guarded for operator safety.

45

$815.00

5273035

PTOC-150-600-6SP

0-100 PSI cast iron straight centrifugal with pulleys and 10 groove belt assembled for mounting on 1-3/8”, 600 RPM PTO shaft. Viton mechanical seal. Fully guarded for operator safety.

51

$860.00

5273036

PTOC-150-600-6SPQC

0-100 PSI cast iron straight centrifugal with pulleys and 10 groove belt assembled for mounting on 1-3/8”, 600 RPM PTO Shaft; equipped with Quick Coupler. Viton mechanical seal. Fully guarded for operator safety

51

$870.00

5273037

PTOC-150-1000-21SP

0-100 PSI, cast iron straight centrifugal with pulleys and 10 groove belt assembled for direct mounting on 1-3/8” 1000 RPM PTO Shaft. Equipped with 21 spline PTO shaft and locking collar. Viton Mechanical seal. Fully guarded for operator safety.

48

$885.00

5273038

PTOC-150-1000-20SP

0-100 PSI, cast iron straight centrifugal with pulleys and 10 groove belt assembled for mounting on 1-3/4” 1000 RPM PTO shaft. Equipped with 20 spline PTO shaft and locking collar. Viton mechanical seal. Fully guarded for operator safety.

50

$910.00

CENTRIFUGAL PUMPS - TRACTOR HYDRAULIC SYSTEM DRIVEN

Cast iron 1 1/4” x 1” frame mounted straight centrifugal pump for tractor hydraulic system applications. Assembled with hydraulic motor equipped with internal check valve to prevent reverse rotation and resulting seal damage. Also equipped with integral needle valve to control input of fluid on open center tractor hydraulic systems and a restrictor orifice to control input of fluid on closed center systems is included with Model FMC-HYD-204. (Models FMCHYD-210 and FMC-HYD-310 are not equipped with restrictor orifice). To match pump model with tractor hydraulic system capacity, refer to chart below.

Models FMC-HYD-204 and FMC-HYD-210 produce 0-100 PSI at maximum 4600 RPM and 60 GPM at open discharge. Model FMC-HYD-310 produces 0-65 PSI at maximum 3950 RPM and 60 GPM at open discharge. For open center systems which require sprayer pump pressures of from 60 to 100 PSI, pump model FMC-HYD-210 should be selected where the tractor system has a minimum
of 8 GPM at 500 PSI available at the remote ports.

The New Model No. FMC-150-HYD-206 has 1-1/2” x 1-1/4” ports. Maximum pressure 120 PSI at 5100 RPM at open discharge. 7 GPM hydraulic motor can be used on pressure compensating Closed Center Systems (John Deere Type), Load Sensing Closed Center Systems (Case-IH type), and Open Center Systems Rated 7-16 GPM. Equipped with restrictor Orifice.

TRACTOR HYDRAULIC SYSTEM REMOTE OUTLET CAPACITY (GPM)
HS Indicates which Pumps may be used with which Hydraulic Systems

Fimco
Code

Model
Number

Pressure Compensating
CLOSED CENTER
(John Deere Type)

Load Sensing
CLOSED CENTER
(Case-IH Type)

OPEN CENTER

Wt.

Price

5271132

FMC HYD 204

HS

 

4-13 GPM

26

$840.00

5271733

FMC HYD 210

 

HS

8-17 GPM

27

$840.00

5271940

FMC HYD 310

 

 

18-24 GPM

33

$875.00

5271734

FMC-150-HYD-206

HS

HS

7-16 GPM

31

$865.00

FRAME MOUNTED CENTRIFUGAL PUMPS - COUNTER-CLOCKWISE ROTATION

5271128

FMC-MIA

Cast iron 1 1/4” x 1” frame mounted straight centrifugal pump for belt drive application. 0-100 PSI at maximum 4600 RPM, 60 GPM at open discharge. Equipped with Viton mechanical seal. Mounting frame machined for idler arm.

18

$390.00

5168201

FMK

Mounting kit for John Deere 1000 RPM front PTO shaft. For use with Ace counter-clockwise rotation Models FMC and FMCH, when adapted to John Deere tractor Models 2510, 3010, 4010, 2520, 3020, 4020, and 4520. Includes mounting bracket, belts and splined pulley.

11

$344.50

5271819

FMC-MAG

Cast iron 1 1/4” x 1” frame mounted counter-clockwise rotation straight centrifugal pump assembled with 12 volt DC belt driven magnetic clutch. 0-100 PSI at max. 4600 RPM, 60 GPM at open discharge. Equipped with Viton mechanical seal.

22

$720.00

For professional advice on sprayers or pest control equipment call 360 736 5634 or click here to email Spraying Equipment Supply. At Spraying Equipment and Supply we are dedicated to providing you with the best quality and innovative agricultural sprayers and pest control equipment and in the least expensive manner possible.

Cross Bed Sprayers

SES25CB cross bed Sprayers, 25 Gallon,complete with GES Gun, Brass Quick coupler, Air Gap Filler and lid lock. Hose reel with 300ft urethane blend spray hose, approx weight 130 lbs.

Regular Price $1895.00, plus shipping Click photo for full size.

Click sprayer for full size photo

 

Contact us today

Telephone: 360 736 5634

Or click below to email
Spraying Equipment Supply

SHOPPING CART: Minimum order is $35.00, excluding shipping

We accept VISA MASTERCARD AMEX OR DISCOVERY credit cards.